Harley-Davidson Evolution Engines S&S Billet Rocker Cover Assemblies...
download 1. Wash motorcycle, taking care to remove sand and other abrasive debris from engine and area of frame around engine. Remove battery, gas tanks, and all parts required to access original...
View ArticleHARLEY DAVIDSON AUXILIARY BRAKE/RUN/TURN SIGNAL CONVERTER KIT INSTALLATION...
download INSTALLATION To prevent accidental vehicle start-up, which could cause death or serious injury, disconnect negative (-) battery cable before proceeding. (00048a) Disconnect negative (-)...
View ArticleHarley-Davidson Style Rocker Cover Assemblies installation Instructions
download Installation 1. Wash motorcycle, taking care to remove sand and other abrasive debris from engine and area of frame around engine. Remove battery, gas tanks, and all parts required to access...
View ArticleHARLEY DAVIDSON FLSTN SADDLEBAG GUARD KIT REMOVAL AND INSTALLATION MANUAL
download REMOVAL All Models 1. If equipped with saddlebags, removal may ease installation. Follow the instructions in the appropriate Service Manual or Instruction Sheet. 2. See Figure 1. Remove and...
View ArticleHarley-Davidson XL 883 and 1200 MODELS SADDLEBAG SUPPORT KIT INSTALLATION...
download 1. 1994-99 models: Remove upper shock absorber nut, washer, shock cover and backing washer. Save nut and washer and discard shock cover and backing washer. 2000-03 models: Remove upper shock...
View ArticleHARLEY DAVIDSON CHROME PASSENGER FOOTBOARD SUPPORT KIT INSTALLATION INSTRUCTIONS
download Removing Passenger Footpegs 1. Remove and discard the socket screw and lock washer attaching the existing footpeg bracket to the rear swing arm bracket. Proceed to Step 5. Removing Passenger...
View ArticleHarley Davidson Softail Drive Side Brake System Installation Manual
download Removing The Stock Components Although the PM Drive Side Brake System can be installed with the swing arm bolted to the frame, we recommend removing it for better access as well as repainting....
View ArticleHARLEY DAVIDSON SADDLEBAG SUPPORT (DRESSER BAR) KIT CHROME INSTALLATION MANUAL
download INSTALLATION To prevent accidental vehicle start-up, which could cause death or serious injury, disconnect negative (-) battery cable before proceeding. (00048a) 1. Refer to the Service Manual...
View ArticleHarley-Davidson Twin Cam 88 S&S Billet Rocker Covers Installation Instructions
download Failure to confirm pushrod/lifter placement before proceeding with installation can result in damage to rocker arm support plates and other parts. With pushrods at lowest point, front piston...
View ArticleIndian Rocker Arm End Play Rear Cylinder/ Front Cylinder Installation
download Rear Cylinder 1Rotate the engine so that the rear piston is at Top Dead Center (TDC), compression stroke, so no load is on the valves. 2Using a 3/16″ allen wrench, remove the four screws...
View Article
